Anisotropic Superconducting Nb2 CTx MXene Processed by Atomic Exchange at the Wafer Scale.

Superconductivty has recently been induced in MXenes through surface modification. However, the previous reports have mostly been based on powders or cold-pressed pellets, with no known reports on the intrinsic superconsucting properties of MXenes at the nanoale. Here, it is developed a high-temperature atomic exchange process in NH3 atmosphere which induces superconductivity in either singleflakes or thin films of Nb2 CTx MXene. The exchange process between nitrogen atoms and fluorine, carbon, and oxygen atoms in the MXene lattice and related structural adjustments are studied using both experiments and density functional theory. Using either single-flake or thin-film devices, an anisotropic magnetic response of the 2D superconducting transformation has been successfully revealed. The anisotropic superconductivity is further demonstrated using superconducting thin films uniformly deposited over a 4 in. wafers, which opens up the possibility of scalable MXene-based superconducting devices.

Discovery of a three-proton insertion mechanism in α-molybdenum trioxide leading to enhanced charge storage capacity.

The α-molybdenum trioxide has attracted much attention for proton storage owing to its easily modified bilayer structure, fast proton insertion kinetics, and high theoretical specific capacity. However, the fundamental science of the proton insertion mechanism in α-molybdenum trioxide has not been fully understood. Herein, we uncover a three-proton intercalation mechanism in α-molybdenum trioxide using a specially designed phosphoric acid based liquid crystalline electrolyte. The semiconductor-to-metal transition behavior and the expansion of the lattice interlayers of α-molybdenum trioxide after trapping one mole of protons are verified experimentally and theoretically. Further investigation of the morphology of α-molybdenum trioxide indicates its fracture behavior upon the proton intercalation process, which creates diffusion channels for hydronium ions. Notably, the observation of an additional redox behavior at low potential endows α-molybdenum trioxide with an improved specific discharge capacity of 362 mAh g-1.

Optimized Charge Storage in Aza-Based Covalent Organic Frameworks by Tuning Electrolyte Proton Activity.

Proton activity in electrolytes plays a crucial role in deciding the electrochemical performance of aqueous batteries. On the one hand, it can influence the capacity and rate performance of host materials because of the high redox activity of protons. On the other hand, it can also cause a severe hydrogen evolution reaction (HER) when the protons are aggregated near the electrode/electrolyte interface. The HER dramatically limits the potential window and the cycling stability of the electrodes. Therefore, it is critical to clarify the impact of electrolyte proton activity on the battery macro-electrochemical performance. In this work, using an aza-based covalent organic framework (COF) as a representative host material, we studied the effect of electrolyte proton activity on the potential window, storage capacity, rate performance, and cycle stability in various electrolytes. A tradeoff relationship between proton redox reactions and the HER in the COF host is revealed by utilizing various in situ and ex situ characterizations. Moreover, the origin of proton activity in near-neutral electrolytes is discussed in detail and is confirmed to be related to the hydrated water molecules in the first solvation shell. A detailed analysis of the charge storage process in the COFs is presented. These understandings can be of importance for utilizing the electrolyte proton activity to build high-energy aqueous batteries.

A Laser-Induced Mo2 CTx MXene Hybrid Anode for High-Performance Li-Ion Batteries.

MXenes, a fast-growing family of two-dimensional (2D) transition metal carbides/nitrides, are promising for electronics and energy storage applications. Mo2 CTx MXene, in particular, has demonstrated a higher capacity than other MXenes as an anode for Li-ion batteries. Yet, such enhanced capacity is accompanied by slow kinetics and poor cycling stability. Herein, it is revealed that the unstable cycling performance of Mo2 CTx is attributed to the partial oxidation into MoOx with structural degradation. A laser-induced Mo2 CTx /Mo2 C (LS-Mo2 CTx ) hybrid anode has been developed, of which the Mo2 C nanodots boost redox kinetics, and the laser-reduced oxygen content prevents the structural degradation caused by oxidation. Meanwhile, the strong connections between the laser-induced Mo2 C nanodots and Mo2 CTx nanosheets enhance conductivity and stabilize the structure during charge-discharge cycling. The as-prepared LS-Mo2 CTx anode exhibits an enhanced capacity of 340 mAh g-1 vs 83 mAh g-1 (for pristine) and an improved cycling stability (capacity retention of 106.2% vs 80.6% for pristine) over 1000 cycles. The laser-induced synthesis approach underlines the potential of MXene-based hybrid materials for high-performance energy storage applications.

Large-Area Metal-Semiconductor Heterojunctions Realized via MXene-Induced Two-Dimensional Surface Polarization.

Direct MXene deposition on large-area 2D semiconductor surfaces can provide design versatility for the fabrication of MXene-based electronic devices (MXetronics). However, it is challenging to deposit highly uniform wafer-scale hydrophilic MXene films (e.g., Ti3C2Tx) on hydrophobic 2D semiconductor channel materials (e.g., MoS2). Here, we demonstrate a modified drop-casting (MDC) process for the deposition of MXene on MoS2 without any pretreatment, which typically degrades the quality of either MXene or MoS2. Different from the traditional drop-casting method, which usually forms rough and thick films at the micrometer scale, our MDC method can form an ultrathin Ti3C2Tx film (ca. 10 nm) based on a MXene-introduced MoS2 surface polarization phenomenon. In addition, our MDC process does not require any pretreatment, unlike MXene spray-coating that usually requires a hydrophilic pretreatment of the substrate surface before deposition. This process offers a significant advantage for Ti3C2Tx film deposition on UV-ozone- or O2-plasma-sensitive surfaces. Using the MDC process, we fabricated wafer-scale n-type Ti3C2Tx-MoS2 van der Waals heterojunction transistors, achieving an average effective electron mobility of ∼40 cm2·V-1·s-1, on/off current ratios exceeding 104, and subthreshold swings of under 200 mV·dec-1. The proposed MDC process can considerably enhance the applications of MXenes, especially the design of MXene/semiconductor nanoelectronics.

Preferential Pyrolysis Construction of Carbon Anodes with 8400†h Lifespan for High-Energy-Density K-ion Batteries.

Carbonaceous materials are promising anodes for practical potassium-ion batteries, but fail to meet the requirements for durability and high capacities at low potentials. Herein, we constructed a durable carbon anode for high-energy-density K-ion full cells by a preferential pyrolysis strategy. Utilizing S and N volatilization from a π-π stacked supermolecule, the preferential pyrolysis process introduces low-potential active sites of sp2 hybridized carbon and carbon vacancies, endowing a low-potential "vacancy-adsorption/intercalation" mechanism. The as-prepared carbon anode exhibits a high capacity of 384.2 mAh g-1 (90 % capacity locates below 1 V vs. K/K+ ), which contributes to a high energy density of 163 Wh kg-1 of K-ion full battery. Moreover, abundant vacancies of carbon alleviate volume variation, boosting the cycling stability over 14 000 cycles (8400 h). Our work provides a new synthesis approach for durable carbon anodes of K-ion full cells with high energy densities.

Charge self-regulation in 1T'''-MoS2 structure with rich S vacancies for enhanced hydrogen evolution activity.

Active electronic states in transition metal dichalcogenides are able to prompt hydrogen evolution by improving hydrogen absorption. However, the development of thermodynamically stable hexagonal 2H-MoS2 as hydrogen evolution catalyst is likely to be shadowed by its limited active electronic state. Herein, the charge self-regulation effect mediated by tuning Mo-Mo bonds and S vacancies is revealed in metastable trigonal MoS2 (1T'''-MoS2) structure, which is favarable for the generation of active electronic states to boost the hydrogen evolution reaction activity. The optimal 1T'''-MoS2 sample exhibits a low overpotential of 158 mV at 10 mA cm-2 and a Tafel slope of 74.5 mV dec-1 in acidic conditions, which are far exceeding the 2H-MoS2 counterpart (369 mV and 137 mV dec-1). Theoretical modeling indicates that the boosted performance is attributed to the formation of massive active electronic states induced by the charge self-regulation effect of Mo-Mo bonds in defective 1T'''-MoS2 with rich S vacancies.

A Sustainable NH4 + Ion Battery by Electrolyte Engineering.

Aqueous ammonium ion battery is a promising sustainable energy storage system. However, the side reactions originating from electrolytes (the water decomposition and host material dissolution) preclude its practical applications. Unlike the metal-based aqueous batteries, the idea of "ultrahigh concentrated electrolyte" is not feasible due to the strong hydrolysis of ammonium ions. Therefore, we propose an effective and sustainable strategy for the water hydrogen bond network modulation by adding sucrose into the electrolytes. The sucrose can form sucrose-water hydrogen bond networks to break the continuous water hydrogen bond network, thereby inhibiting water decomposition significantly. Moreover, the weak hydrogen bond interaction between ammonium and sucrose facilitates rapid ion migration, leading to an improved ionic conductivity. This work presents a new electrolyte modulating strategy for the practical application of aqueous ammonium ion batteries.

A 2.75†V ammonium-based dual-ion battery.

The popular metal-ion batteries (MIBs) suffer from environmental and economic issues because of their heavy dependency on nonrenewable metals. Here, we propose a metal-free ammonium (NH4 + )-based dual-ion battery with a record-breaking operation voltage of 2.75 V. The working mechanism of this sustainable battery involves the reversible anion (PF6 - ) intercalation chemistry in graphite cathode and NH4 + intercalation behavior in PTCDI (3,4,9,10-perylenetetracarboxylic diimide) anode. This new battery configuration successfully circumvented the reduction susceptibility of NH4 + and the lack of mature NH4 + -rich cathodes for NH4 + ion batteries (AIBs). The customized organic NH4 + electrolyte endows the graphite||PTCDI full battery with durable longevity (over 1000 cycles) and a high energy density (200 Wh kg-1 ). We show that the development of AIBs should be high-voltage-oriented while circumventing low operation potential to avoid NH4 + reduction.

Three-Dimensional Ti3C2Tx MXene-Prussian Blue Hybrid Microsupercapacitors by Water Lift-Off Lithography.

The construction of electrochemical energy-storage devices by scalable thin-film microfabrication methods with high energy and power density is urgently needed for many emerging applications. Herein, we demonstrate an in-plane hybrid microsupercapacitor with a high areal energy density by employing a battery-type CuFe-Prussian blue analogue (CuFe-PBA) as the positive electrode and pseudocapacitive titanium carbide MXene (Ti3C2Tx) as the negative electrode. A three-dimensional lignin-derived laser-induced graphene electrode was prepared as the substrate by laser exposure combined with an environmentally friendly water lift-off lithography. The designed hybrid device achieved enhanced electrochemical performance thanks to the ideal match of the two types of high-rate performance materials in proton-based electrolytes and the numerous electrochemically active sites. In particular, the device delivers a high areal capacitance of 198 mF cm-2, a wide potential window (1.6 V), an ultrahigh rate performance (75.8 mF cm-2 retained even at a practical/high current density of 100 mA cm-2), and a competitive energy density of 70.5 and 27.6 µWh cm-2 at the power densities 0.74 and 52 mW cm-2, respectively. These results show that the Ti3C2Tx/CuFe-PBA hybrid microsupercapacitors are promising energy storage devices in miniaturized portable and wireless applications.

Porous Ti3C2Tx MXene Membranes for Highly Efficient Salinity Gradient Energy Harvesting.

Extracting osmotic energy through nanoporous membranes is an efficient way to harvest renewable and sustainable energy using the salinity gradient between seawater and river water. Despite recent advances of nanopore-based membranes, which have revitalized the prospect of blue energy, their energy conversion is hampered by nanomembrane issues such as high internal resistance or low selectivity. Herein, we report a lamellar-structured membrane made of nanoporous Ti3C2Tx MXene sheets, exhibiting simultaneous enhancement in permeability and ion selectivity beyond their inherent trade-off. The perforated nanopores formed by facile H2SO4 oxidation of the sheets act as a network of cation channels that interconnects interplanar nanocapillaries throughout the lamellar membrane. The constructed internal nanopores lower the energy barrier for cation passage, thereby boosting the preferential ion diffusion across the membrane. A maximum output power density of the nanoporous Ti3C2Tx MXene membranes reaches up to 17.5 W·m-2 under a 100-fold KCl gradient at neutral pH and room temperature, which is as high as by 38% compared to that of the pristine membrane. The membrane design strategy employing the nanoporous two-dimensional sheets provides a promising approach for ion exchange, osmotic energy extraction, and other nanofluidic applications.

Lattice Orientation Heredity in the Transformation of 2D Epitaxial Films.

The ability to control lattice orientation is often an essential requirement in the growth of both 2D van der Waals (vdW) layered and nonlayered thin films. Here, a unique and universal phenomenon termed "lattice orientation heredity" (LOH) is reported. LOH enables product films (including 2D-layered materials) to inherit the lattice orientation from reactant films in a chemical conversion process, excluding the requirement on the substrate lattice order. The process universality is demonstrated by investigating the lattice transformations in the carbonization, nitridation, and sulfurization of epitaxial MoO2 , ZnO, and In2 O3 thin films. Their resultant compounds all inherit the mono-oriented crystal feature from their precursor oxides, including 2D vdW-layered semiconductors (e.g., MoS2 ), metallic films (e.g., MXene-like Mo2 C and MoN), wide-bandgap semiconductors (e.g., hexagonal ZnS), and ferroelectric semiconductors (e.g., In2 S3 ). Using LOH-grown MoN as a seeding layer, mono-oriented GaN is achieved on an amorphous quartz substrate. The LOH process presents a universal strategy capable of growing epitaxial thin films (including 2D vdW-layered materials) not only on single-crystalline but also on noncrystalline substrates.

Muscle Fatigue Sensor Based on Ti3 C2 Tx MXene Hydrogel.

MXene-based hydrogels have received significant attention due to several promising properties that distinguish them from conventional hydrogels. In this study, it is shown that both strain and pH level can be exploited to tune the electronic and ionic transport in MXene-based hydrogel (M-hydrogel), which consists of MXene (Ti3 C2 Tx )-polyacrylic acid/polyvinyl alcohol hydrogel. In particular, the strain applied to the M-hydrogel changes MXene sheet orientation which leads to modulation of ionic transport within the M-hydrogel, due to strain-induced orientation of the surface charge-guided ionic pathway. Simultaneously, the reorientation of MXene sheets under the axial strain increases the electronic resistance of the M-hydrogel due to the loss of the percolative network of conductive MXene sheets during the stretching process. The iontronic characteristics of the M-hydrogel can thus be tuned by strain and pH, which allows using the M-hydrogel as a muscle fatigue sensor during exercise. A fully functional M-hydrogel is developed for real-time measurement of muscle fatigue during exercise and coupled it to a smartphone to provide a portable or wearable digital readout. This concept can be extended to other fields that require accurate analysis of constantly changing physical and chemical conditions, such as physiological changes in the human body.

Chiral Helimagnetism and One-Dimensional Magnetic Solitons in a Cr-Intercalated Transition Metal Dichalcogenide.

Chiral magnets endowed with topological spin textures are expected to have promising applications in next-generation magnetic memories. In contrast to the well-studied 2D or 3D magnetic skyrmions, the authors report the discovery of 1D nontrivial magnetic solitons in a transition metal dichalcogenide 2H-TaS2 via precise intercalation of Cr elements. In the synthetic Cr1/3 TaS2 (CTS) single crystal, the coupling of the strong spin-orbit interaction from TaS2 and the chiral arrangement of the magnetic Cr ions evoke a robust Dzyaloshinskii-Moriya interaction. A magnetic helix having a short spatial period of ≈25 nm is observed in CTS via Lorentz transmission electron microscopy. In a magnetic field perpendicular to the helical axis, the helical spin structure transforms into a chiral soliton lattice (CSL) with the spin structure evolution being consistent with the chiral sine-Gordon theory, which opens promising perspectives for the application of CSL to fast-speed nonvolatile magnetic memories. This work introduces a new paradigm to soliton physics and provides an effective strategy for seeking novel 2D magnets.

Electrochemical multi-analyte point-of-care perspiration sensors using on-chip three-dimensional graphene electrodes.

Multi-analyte sensing using exclusively laser-induced graphene (LIG)-based planar electrode systems was developed for sweat analysis. LIG provides 3D structures of graphene, can be manufactured easier than any other carbon electrode also on large scale, and in form of electrodes: hence, it is predestinated for affordable, wearable point-of-care sensors. Here, it is demonstrated that LIG facilitates all three electrochemical sensing strategies (voltammetry, potentiometry, impedance) in a multi-analyte system for sweat analysis. A potentiometric potassium-ion-selective electrode in combination with an electrodeposited Ag/AgCl reference electrode (RE) enabled the detection of potassium ions in the entire physiologically relevant range (1 to 500 mM) with a fast response time, unaffected by the presence of main interfering ions and sweat-collecting materials. A kidney-shaped interdigitated LIG electrode enabled the determination of the overall electrolyte concentration by electrochemical impedance spectroscopy at a fixed frequency. Enzyme-based strategies with amperometric detection share a common RE and were realized with Prussian blue as electron mediator and biocompatible chitosan for enzyme immobilization and protection of the electrode. Using glucose and lactate oxidases, lower limits of detection of 13.7 ± 0.5 µM for glucose and 28 ± 3 µM for lactate were obtained, respectively. The sensor showed a good performance at different pH, with sweat-collecting tissues, on a model skin system and furthermore in synthetic sweat as well as in artificial tear fluid. Response time for each analytical cycle totals 75 s, and hence allows a quasi-continuous and simultaneous monitoring of all analytes. This multi-analyte all-LIG system is therefore a practical, versatile, and most simple strategy for point-of-care applications and has the potential to outcompete standard screen-printed electrodes. Graphical abstract.

Direct and continuous generation of pure acetic acid solutions via electrocatalytic carbon monoxide reduction.

Electrochemical CO2 or CO reduction to high-value C2+ liquid fuels is desirable, but its practical application is challenged by impurities from cogenerated liquid products and solutes in liquid electrolytes, which necessitates cost- and energy-intensive downstream separation processes. By coupling rational designs in a Cu catalyst and porous solid electrolyte (PSE) reactor, here we demonstrate a direct and continuous generation of pure acetic acid solutions via electrochemical CO reduction. With optimized edge-to-surface ratio, the Cu nanocube catalyst presents an unprecedented acetate performance in neutral pH with other liquid products greatly suppressed, delivering a maximal acetate Faradaic efficiency of 43%, partial current of 200 mA⋅cm-2, ultrahigh relative purity of up to 98 wt%, and excellent stability of over 150 h continuous operation. Density functional theory simulations reveal the role of stepped sites along the cube edge in promoting the acetate pathway. Additionally, a PSE layer, other than a conventional liquid electrolyte, was designed to separate cathode and anode for efficient ion conductions, while not introducing any impurity ions into generated liquid fuels. Pure acetic acid solutions, with concentrations up to 2 wt% (0.33 M), can be continuously produced by employing the acetate-selective Cu catalyst in our PSE reactor.

Unprecedented Surface Plasmon Modes in Monoclinic MoO2 Nanostructures.

Developing stable plasmonic materials featuring earth-abundant compositions with continuous band structures, similar to those of typical metals, has received special research interest. Owing to their metal-like behavior, monoclinic MoO2 nanostructures have been found to support stable and intense surface plasmon (SP) resonances. However, no progress has been made on their energy and spatial distributions over individual nanostructures, nor the origin of their possibly existing specific SP modes. Here, various MoO2 nanostructures are designed via polydopamine chemistry and managed to visualize multiple longitudinal and transversal SP modes supported by the monoclinic MoO2 , along with intrinsic interband transitions, using scanning transmission electron microscopy coupled with ultrahigh-resolution electron energy loss spectroscopy. The identified geometry-dependent SP energies are tuned by either controlling the shape and thickness of MoO2 nanostructures through their well-designed chemical synthesis, or by altering their length using a developed electron-beam patterning technique. Theoretical calculations reveal that the strong plasmonic behavior of the monoclinic MoO2 is associated with the abundant delocalized electrons in the Mo d orbitals. This work not only provides a significant improvement in imaging and tailoring SPs of nonconventional metallic nanostructures, but also highlights the potential of MoO2 nanostructures for micro-nano optical and optoelectronic applications.

MXene Derived Metal-Organic Frameworks.

Synthesis of nanoscale metal-organic frameworks (MOFs) is a highly challenging task because conventional soluble metal salt precursors are not easy to manipulate spatially, thus normally leading to bulk MOFs. In the present work, V2CTx MXene is demonstrated for the first time as a metal precursor to fabricate two-dimensional (2D) MOF nanosheets, whose thickness (6 to 18 nm) can be tuned by varying the reaction temperature. The highly electronegative surface atoms of MXene and sufficient accessible attacking sites for ligands are responsible for the evolution of 2D MOF nanosheets. Moreover, highly oriented and smooth MOF thin films have been grown based on these nanosheets using a convenient spin coating process. With the impregnation of nonvolatile H3PO4, the MOF thin film exhibits a proton-conducting property. This study demonstrates that high-quality 2D MOF sheets and thin films are enabled by 2D MXene precursors. We believe that the high-quality MOF films prepared in this study pave the way for many device applications.

Wettability-Driven Assembly of Electrochemical Microsupercapacitors.

In this work, we demonstrate a wettability-driven assembly (WDA) process of active particulate materials for microsupercapacitor (MSC) fabrication. Our process uses three-dimensional laser-scribed graphene (LSG), derived from polyimide, as a current collector. We exploit the drastic wettability difference between LSG and unconverted polyimide toward water to assemble various electrodes on the LSG collectors. The WDA process is demonstrated using porous carbon and RuO2 nanoparticles, which are spontaneously and selectively assembled onto the LSG finger electrodes. The MSCs assembled using the WDA process with porous carbon as active material deliver a much higher areal capacitance (41.2 mF cm-2) compared to MSCs using LSG-only electrodes (1.2 mF cm-2). Thus, they deliver a high areal energy density of 5.71 µWh cm-2 with an areal power density of 4.0 mW cm-2. The capacitance and energy density of these porous carbon MSCs outperform most recently reported carbon-based MSCs. In comparison, the MSCs assembled using the WDA process with RuO2 nanoparticles as active material deliver an areal capacitance of 70.3 mF cm-2 and an areal energy density of 9.71 µWh cm-2. All in all, the WDA process is green, simple, and well suited for the fabrication of MSCs using many types of active materials.